DIY Easy Security Ink Tag Removal Process-Quick Detachment Method. Extra care must be taken with regards to safety when using this method as the clothing item could easy get wrapped around the grinder and you could lose a finger or a hand. This method is not recommended for the Ink capsule style tags as theContinue reading “DIY How to Remove Retail Security Ink Tags”
Tag Archives: instructions
16 Simple DIY Practical Pallet Projects
Pallet projects are so fun and you can’t go wrong because the wood is FREE! Check out these numerous DIY pallet projects I’ve made over the last couple years.
Delicious Hazy Mosaic Centennial IPA
For this delicious home brew I used liquid malt extract made by Morgan’s (Frontier IPA) and dry spray malt hopped light. This sucker turned out wonderful. I used Centennial and Mosaic hops. No boiling was involved or needed at all in this brewing session. The hopping technique was dry hopping. I just simply mixed theContinue reading “Delicious Hazy Mosaic Centennial IPA”
How to Replace Weed Wacker Line-Troy Bolt Weed Wacker
For years the old lawn edgers “weed wackers” would run really good when you first purchased them and then once you let them sit for various periods of time between lawn mowing sessions, it would be hell getting them started. I’ve seen more weed wackers tossed across lawns in my time than homelite chainsaws. TheContinue reading “How to Replace Weed Wacker Line-Troy Bolt Weed Wacker”
Fun in GMC Sierra Ownership: What to Expect
Service Tire Monitor System Dash Warning-What to do about it This warning is telling you that at least one of your Tire Pressure Monitoring System (TPMS) sensors are faulty. These sensors are located inside the tires and cannot be replaced without removing the tire from the rim. If one of them are bad, then theContinue reading “Fun in GMC Sierra Ownership: What to Expect”
16 Common DIY Home Plumbing Projects
DIY Outdoor Brass Hose Spigot Replacement The old twist knob outdoor spigot was very old and less easy to operate than a nice new easy to use ball valve. The first step is to shut off the water at the water main. The next step is to remove the old spigot. I used a coupleContinue reading “16 Common DIY Home Plumbing Projects”
DIYTechnician 